| • |
Since stable Vapour Flux evaporation can be obtained with Vapour Flux fixed level function, heating conditions are stable and good brazing can be performed.
 |
| • |
Since sensor is not used, there is no adjustment place.
|
| • |
As quantity of Vapour Flux can be kept a little in Vapour Tank, staying Vapour Flux is decreased in Vapour Tank. Therefore, aging of Vapour Flux can be prevented and stable evaporation can be obtained.
|
| • |
Between Vapour Tank and supplementary tank is cut off always with 2 pcs. of valve controls, there is no way that Vapour Flux in Vapour Tank flows backward to supplementary tank.
|
| • |
It is not necessary to add Vapour Flux during operation, since supplementary tank has large capacity.
|
| • |
As Vapour Tank and supplementary tank are made of stainless steel, aging Vapour Flux is prevented and it is economical.
|
| • |
Maximum used quantity of Vapour Flux per hour can be selected with switch, however, under maximum quantity, it corresponds automatically according to used quantity.
|
| • |
Remained quantity of Vapour Flux in supplementary tank can be seen with level gauge easily.
|
| • |
ON/OFF control signals from outside can be input.
|
