|
 |
| DE Saver is the product featuring "COST-DOWN" "SAFETY" and "EASY OPERATION" for gas welding and gas brazing operation. |
|
|
Using DE Saver, what an operator has to do is only to ignite the torch at beginning of gas welding or brazing operation and to hang it to the hanger for extinguishing the torch after the operation. There are no troublesome valve adjustments of the torch. The ignition to the torch can be done within 2.0 seconds, while the pilot flame burns. Since the pilot flame is off during operation, it saves the gas consumption.
The gas discharge will stop within 2.0 seconds, when the torch fall off from the hanger or the device falls down caused by emergency disasters such as an earthquake or an accident. Moreover, the gas discharge will also inevitably stop, when a power supply is cut off. Then after an electric power is restored, the gas does not discharged, as the solenoid valves are locked with "FULL INTERLOCK" system.
Any types of the torches can be hung on or off the hanger smoothly and ignition is film and easy. The pilot flame is not be extinguished by wind, fan or a spot cooler due to the forced combustion with spark.
|
| ♦SPECIFICATION♦ |
|
| Rating voltage |
AC100V |
| Outer dimension |
120(W)×116(D)×230(H)mm |
| Weight |
Approx. 4kg |
| Ignition method |
Spark ignition |
| Flame detection |
Flame rod |
| Connecting method |
Hose joint/Flame nut (M16-P15) |
|
| |
|
|
|
|
|
|
| Copyright © 2005 DAISHIN INDUSTRIAL CO.,LTD. All Rights Reserved |
|
